Use an appropriate amount of aluminum powder: The amount of aluminum powder added should be between 5% and 6%. Too much or too little will affect the gasification speed and product quality. Therefore, the amount of aluminum powder added should be strictly controlled during the production process, and the amount should be adjusted appropriately according to the actual situation.
Change the ratio of other raw materials: You can try to change the ratio of other raw materials, such as changing the ratio of cement and lime, increasing the amount of gypsum added, etc. These changes may affect the strength, density and other properties of aerated bricks, and need to be tested in production practice and adjusted according to actual conditions.
Optimize production processes and conditions: Use better mixing equipment and methods, increase mixing time and speed, increase steaming time, etc. At the same time, control factors such as temperature, humidity and ventilation in the production environment to ensure the stability and rationality of production conditions and processes.
Use other foaming agents: In addition to aluminum powder, organic foaming agents and inorganic foaming agents can also be used. These foaming agents can be mixed with aluminum powder to achieve the effect of accelerating foaming. Corresponding experiments and adjustments are required before use. Regularly check equipment and raw materials: Damage or deterioration of equipment and raw materials will affect the gasification speed and product quality, so they need to be checked and replaced regularly. At the same time, carry out maintenance and maintenance of equipment and production lines to ensure their normal operation and stability.
Jiangsu Jiali New Material Technology Co., Ltd. Is manufacturer of Aluminum paste for AAC blocks, should you have any questions please feel free to contact us :
Contact: Lorena
Mobile: +86 15366416606 ( Wechat & Whatsapp ID)
Email: lorena@jlmaterial.com